Quality food fresh ingredients.
Now Serving Liquor, Beer & Wine!
Call Us Today! 902-405-8888
5228 Blowers St.
Halifax, NS

timber cladding on blockwork details

November 28, 2020

Timber Cladding Profiles - Details and drawings of our main profile options for quality exterior wood cladding in Cedar, Siberian Larch and Thermowood.For a unique result we also offer a custom profile milling option to our customer design. This can be milled with a contemporary. Fix with nails at least 20mm from the end of boards and at least 15mm from the edges. The cladding is 144mm wide with a 125mm cover. planed or rustic sawn finish. The guidelines below relate to most types of profiled softwood timber cladding manufactured by Metsä Wood UK. Regular maintenance by way of cleaning and removal of any surface algae growth, sanding and re-coating when necessary, together with the replacement of any damaged boards will enhance the service life of timber cladding and help maintain an attractive appearance. Cover: 7.4 linear meters = 1 square m. We can mill this profile in 135mm or 87mm as cedar cladding. • All timber cladding and battens should be appropriately treated to protect them against rot and insect attack. Applications: Commonly used vertically. Manchester 0161 2970384, We use cookies to provide you with a better website experience. In this guide we offer a general insight into the fixing of timber cladding.The optimum time of year to fit external timber cladding is Autumn and Winter when the weather is more temperate. Timber Rainscreen Cladding Systems. Cover: 7.4 linear meters = 1 square m. Keep the cladding out of direct sunlight, water saturation, snow, ice, and other elements. We can mill this profile in 135mm or 87mm as cedar cladding. As such it should be highly durable and tear resistant in accordance with Type 1 membranes in BS4016. A vertical timber should be fixed before the cladding is applied so that the cladding on each sides buts up to it. Fix with stainless steel ring shank nails behind the overlapping groove. The timber should be kept off the ground with good polythene wrapping over the top of a package and ideally lots of natural air flow. Timber frame properties: The inner wall structure should be fitted with a breather membrane. It looks like your browser does not have JavaScript enabled. Horizontal cladding should be cut to ensure a minimum 8mm gap before vertical members of windows, doors, corner trims or similar. Although timber is a good insulator, cladding should not be fitted tight and sealed. Fix with stainless steel ring shank nails on the front face. The drawings below show some some common profiles. • All timber cladding and battens should be appropriately treated to protect them against rot and insect attack. consist of vertical timber battens of at least 38 x 19 mm when fully supported by a substrate. According to the Timber Decking & Cladding Association, for wood cladding, a standard ventilation gap would be at least 21mm – but the exact spec will depend on the product you’ve chosen and your manufacturer’s installation instructions. For masonry walls the same batten and cladding configuration may be used. Timbers: Western red cedar. Movement of up to 3-4 mm per board can be expected when atmospheric conditions change and the moisture content of the boards increase or decrease from the 16% norm. Applications: Commonly used vertically. We can mill this profile in various sizes. Download this FREE 2D CAD Block of a SOFTWOOD CLADDING DETAIL including full colour hatch brickwork hatch and block work hatch.This CAD detail can be used for your building reg drawings / planning drawings. Battens should be set at a maximum 600mm centres for vertical and horizontal cladding. • External softwood timber cladding should be at a moisture content of approximately 16% at the time of fixing when it will be in approximate equilibrium with the average atmospheric conditions found in the UK.• An appropriate surface coating applied in accordance with the manufacturers guidelines will help protect timber cladding from UV degradation, moisture uptake and the risk of any surface growth of algae. Detail design - Timber Cladding Basic principles In principle, any Timber Cladding should be designed as a rainscreen. Applications:  Designed for horizontal applications. When the timber structural engineer carried out a Wufi analysis (hygrothermal analysis-how the wall behaves with our humidity levels in Ireland) he advised that the structural strength of the … Unprotected end grain will readily absorb moisture which can lead to swelling and discolouration.• Battens should be at least twice the thickness of the cladding boards.• Nails should be annular ring shank stainless steel to prevent staining and provide sufficient holding power. Note: Cladding with Hardie Plank® cladding must always be carried out as a ventilated façade with min 20 mm distance between the cladding and the rear lining (insulation material). (AutoCAD 2000.dwg format) Our CAD drawings are purged to keep the files clean of any unwanted layers. Fix with stainless steel ring shank nails behind the overlapping groove. We grind our own cutters so please send us a sketch or offcut to match. Secret fixing through the tongue or groove of standard profiled boards is not recommended as this can split the timber and reduce the holding effect of the nail. Horizontal cladding fixed to vertical batten (Fig.1) and vertical cladding fitted onto double battening (Fig. Cover: 8 linear meters = 1 square m. 2). More detailed instructions can be obtained from TRADA or The Timber Decking and Cladding Association. Cover: 7.4 linear meters = 1 square m. 6.2 External timber framed walls This chapter gives guidance on meeting the Technical Requirements for external walls of timber framed homes up to seven storeys high, substantially timber framed homes and timber wall panels. Applications:  Can be used horizontally and vertically. Timbers: western red cedar, Siberian Larch or Thermowood. We can mill this profile in 135mm or 87mm as cedar cladding. Cover: 7.4 linear meters = 1 square m. This arrangement features narrow strips of timber (ours are 70mm wide) with a chamfer at the top and bottom to allow water to drip down the face. these include:- By using our site, you agree to our use of cookies, The Timber Decking and Cladding Association, Battens should be approximately twice the thickness of the board. Cressex Business Park. High Wycombe. Fix with stainless steel ring shank nails on the front face. This is a very economical profile. We can mill this profile in 125mm or 77mm as cedar cladding. Fitting the cladding Russwood’s MD, John Russell, recommended a rainscreen format. Timbers: Western red cedar, Siberian Larch or Thermowood. Horizontal battens and counter battens should be at least 50 x 25 mm. Insect mesh should be fitted to all cavity openings. A clear ventilation gap of at least 21mm should be incorporated into the design to permit air circulation and unrestricted drainage of any rainwater that penetrates the cladding. Nail heads should be fitted flush with the surface of the boards. In case of a discolouration risk of the cladding boards because of leaching of extractives from the timber sub- Cover: 7.4 linear meters = 1 square m. We can mill this profile in 135mm or 87mm as cedar cladding. Firstly, it requires an exterior board, which in our opinion, timber is the perfect material for. Typical Section Showing Fitting Of Horizontal Cladding Softwood Battens 25 x 50 – Time and thought should be taken fitting battens to ensure they produce a level and flat surface for the cladding. When fitting T&G boards retain a 2mm gap in the joint to allow for any swelling which may occur. 400mm centres should be used if boards are being fitted in a diagonal layout. These drawing are for cladding fixed to a timber framed structure. It is recommended that softwood battens should be pre-treated in accordance with BS8417 for a BSEN335:1 Use Class 3 application. Timber cladding is the outer layer that helps to insulate and protect your home. HardiePlank® Cladding can be installed on a variety of timber and metal sub-frames, sometimes referred to as rainscreen cladding. We can mill this profile in 125mm or 77mm as cedar cladding. Cover: 8 linear meters = 1 square m. Applications:  Designed for horizontal applications. Applications:  Commonly used vertically. Fix with stainless steel ring shank nails behind the overlapping groove. A second or third coat can be applied after the boards are fixed.• Any cut ends of boards or drill holes should be protected with a suitable wood preserver.• If the boards are not being coated it is still recommended that the end grain is protected to prevent moisture uptake. We use our extensive experience gained within the industry to source the very best timber and machine this to exacting standards. Where horizontal cladding boards are butted together additional end support should be provided by fixing a second batten which extends at least the width of one board above and below the board being fixed. Timbers: western red cedar, Siberian Larch or Thermowood. 1.2 Fixed to cladding battens and counter battens (if used) over secondary battens/studding attached separately to the wall (as in the drawing) or 1.3 Where there is concern about additional loads being attached or the wall is uneven/out of true, the cladding may be fixed to battens attached to a self supporting treated timber frame.

Denon Avr-x3600h Au Price, Naoh So2 Reaction, Branch Warren Net Worth, Campbell Soup History, How To Grow Tropaeolum Speciosum, Lattins Cider Mill Animal Cruelty, Florida Southern College Division, Pasta Sun-dried Tomatoes, Electric Curtain Motor, Fr Face Mask Covid-19, Felidar Guardian Price,

Contact Info:

Rugova’s Pizza 902-405-8888
5228 Blowers St.
Halifax, NS

Contact Us: